Brother Printer MFC l2700dw Troubleshooting

Your Brother MFC L2700DW printer will face issues that have to be rectified for the normal functioning of the printer. The instructions that are given below will help you rectify any issues that occur with the printer.

Brother MFC L2700DW Printer Not Connected

  • First, examine the connection between the Brother L2700DW printer and the device.
  • Print a network configuration report and check if you are able to find any test that has failed.
  • Perform troubleshooting based on the test results. From your Mac system, go to HDD ad select the Applications option followed by the Utilities option.
  • Next, select the Network Utility option and then tap the PING button. Specify the IP address of the Brother printer.
  • Choose the Send Only_Pings option and set the value to 4 in the next step.
  • Click the PING button to the right side and check if the Brother printer is responding.
  • Check if you have installed the Brother L2700DW printer driver properly on your system.
  • Set Brother L2700DW as the default printer in the next step.
  • Check if the Brother printer is in the ready state. If not, tap the Power button to bring the printer to the ready mode.

My Brother MFC L2700DW is Offline

  • Check if the Brother L2800DW printer is turned on. Also, check if it is plugged to a proper power source.
  • Check if there are any error messages displayed on the control panel of the printer.
  • Make sure the Brother L2700DW printer and the device are connected properly. Reconnect them if required.
  • Launch the Control Panel on your computer and select the Hardware and Sound option.
  • Choose the Devices and Printers option. Find your Brother printer and right-click on it. Click the Set As Default Printer option.
  • Right-click on it again and select the See What’s Printing option. Go to the Printer tab and select the Cancel All Documents option to clear the print queue.
  • Untick the Use Printer Offline option from the Printer tab to change the printer status to online.
  • Delete other icons that are similar to your Brother printer and check if the issue has been sorted out.
  • Uninstall the Brother printer driver from your system and install it after a few seconds to sort out the printer offline error.
  • Get help from the technical team if the issue persists.

Solve brother MFC l2700dw paper jam issue

Proceed with the following solutions to clear the paper jam issue on your Brother MFC L2700DW printer.

  • Open the Automatic Document Feeder cover of the Brother MFC L2700DW printer and then pull the jammed paper out from it.
  • Make sure to clear torn paper from the ADF to avoid paper jam error in future.
  • After removing the paper jam error from the Automatic Document Feeder, close its cover.
  • After opening the front cover of the Brother MFC L2700DW printer, pull the tray out from it.
  • Pull the jammed paper out from the tray gently using both your hands.
  • Close the front cover of the Brother MFC L2700DW printer and then lift the back cover of it.
  • Check whether you have removed the jammed from the rear tray of the Brother MFC L2700DW printer.
  • Make sure to close the rear cover of the Brother MFC L2700DW properly.
  • Take the toner cartridge and drum unit assembly from the Brother MFC L2700DW printer.
  • Then, push the green lock lever to remove the toner cartridge from the toner cartridge assembly.
  • Clear any ripped paper from the toner cartridge and drum unit assembly and then position the assembly back to its place.

Solve brother MFC l2700dw paper feed Issue

    Follow the solutions mentioned below to prevent the paper feed issue on the Brother MFC L2700DW printer.

    • You have to use only the specified media types such as plain paper, thin paper, thick paper, bond paper, recycled paper, labels, and envelopes.
    • You are recommended not to use inkjet paper.
    • If the paper is curled or wrinkled, press the sides and corner of the paper.
    • Make sure to remove the envelope creases from the manual feed area.
    • You need to load print media in the paper tray correctly by adjusting the paper guides according to the paper width.
    Paper feed issue

Why brother MFC l2700dw prints blank page?

When your Brother MFC L2700DW printer prints blank page, you have to perform the print head cleaning.Proceed with the following troubleshooting steps to clean the print head on the Brother MFC L2700DW printer.

  • On the Brother MFC L2700DW printer operation panel, press Menu Ink OK.
  • Select the Cleaning option and then select OK Black,. Color, or ALL to clean the print head.
  • Press OK for confirmation.
  • Once you finish the print head cleaning, go to Menu Ink OK Test Print, select OK Print Quality OK, and select the COLOR START option to print the Print Quality Sheet. Check the print quality status of your Brother MFC L2700DW printer using the sheet.
  • If you cannot resolve the ‘printing blank pages’ problem on the Brother MFC L2700DW printer, get help from our technical experts.

Disclaimer

brotherprinters.co We focus on offering technical assistance to printer users and are not in any associated with the manufacturer. All the information provided on our site are solely intended for service purpose and not to promote any particular brand or company. The logos, images, and trademarks on the site are for reference purpose. Any action that you take by referring to the guidelines on this site is at your own risk. Our services are payment-based and are rendered only upon the request placed by the users. 

Brother Support

Copyright © 2019 - 2020 brotherprinters.co | All rights are reserved


Top