Brother mfc j775dwl setup

brother-mfc-j775dwl

Brother MFC J775DWL Setup

  • Usually, the printer setup process is quite easy to perform. Once you unpack the printer completely, you can begin the setup process by referring to the product’s user guide. 
  • So, if you are going to set up a new printer, first unpack it.
  • Inside the printer package, you can find s starter ink cartridges, quick setup guide, basic user’s guide, product safety guide, installation disc, and telephone line cord.
  • After removing all the protective tapes and covers from the Brother MFC J775DWL printer, load a set of A4 or U.S paper in the tray.
  • Make sure to adjust the paper guides correctly.
  • Switch on your Brother MFC J775DWL printer.
  • Set the printer preferences as displayed on the screen.
  • Unpack the starter ink cartridges and load them into the Brother MFC J775DWL printer.
  • Make sure to install the ink cartridges into their respective slots.
  • Now, connect the Brother MFC J775DWL printer and your device over a wireless or wired network.
  • If you are using the wireless connection method to connect your devices, enable the Wi-Fi option on your Brother printer.
  • Now, install the Brother MFC J775DWL printer driver on your Windows or Mac system.
  • Finish the driver installation by following the on-screen instructions.
  • Once you complete the Brother MFC J775DWL printer setup process, try a test print or scan operation to verify the device setup.

Brother MFC J775DWL Driver

A driver is a software that gives enables your Windows or Mac system to access the printer and perform operations. To complete the entire Brother printer setup process, you need to install its driver software on your Windows or Mac system. After the printer driver installation, you can start performing the print or scan operation from your computer. An installation disc is provided with the printer package during the first time product purchase. You can also download the Brother MFC J775DWL printer driver software. To download the driver from this web page, click the Driver Download button.

Brother MFC J775DWL Driver Download

  • Open a web browser on your Mac or Windows system.
  • Navigate to the official site of the Brother printer.
  • Choose your Brother printer model from the product's list.
  • Tap the Downloads tab. Now the driver download screen will open.
  • Select your operating system and version type by clicking the Radio button beside them.
  • After selecting the OS Family and Version, click the OK button.
  • Now the list of drivers available for your Brother printer model will appear on the screen.
  • Locate and select the driver you want.
  • Read the agreement note displayed on the screen and click the Agree to the End-User License Agreement (EULA )and Download button.
  • Once the selected driver is downloaded successfully, open it, and begin the installation process.
  • Follow your system's on-screen instructions to finish the driver installation process.
  • Once the installation completes, try a test print or scan operation.

Brother MFC J775DWL Driver Install

The guidelines given below will help you install the Brother MFC J775DWL printer driver on your system.

  • First, complete the initial printer setup.
  • You can use the installation disc provided with the package to install the Brother MFC J775DWL printer driver on your system.
  • Otherwise, download the printer driver from this web page and then begin the installation process.
  • After downloading the printer driver, locate and open the downloaded software file.
  • When prompted, accept the end-user agreement and follow the on-screen instructions.
  • Choose the network connection type by clicking the Radio button beside it.
  • After selecting the network connection type, click the Next button to continue the process.
  • Perform the on-screen instructions to finish the driver installation.
  • Once you have done the driver installation, try a test print to check the printer function.
  • To get remote assistance in installing the Brother MFC J775DW printer driver on your Windows or Mac system, click the Call button to contact our technical experts.

Brother MFC J775DWL Manual

While purchasing the printer for the first time from the manufacturer site or a trusted retail store, you can find a quick setup guide, basic user’s guide, and product safety guide along with the printer. In the quick setup guide, you can find the steps to perform the initial printer setup. If you want a PDF copy of the Brother MFC J775DWL printer’s user manual, click the Manual Download button on this site.

Brother MFC J775DWL Wireless

To know how to connect the Brother MFC J775DWL printer to a wireless network using the WPS method, read the guided instructions given below and proceed with the same.

  • Power on your Brother MFC J775DWL printer and the wireless router.
  • Navigate to your Brother printer’s Settings menu.
  • Using the arrow keys, select Network --> OK --> WLAN --> OK --> WPS --> OK.
  • Now the Enable WLAN message will appear on the screen, tap the OK button to confirm it.
  • Locate the WPS button on your wireless router and press it when the Start WPS message appears on your Brother MFC J775DWL printer.
  • After pressing the WPS button on your Wi-Fi router, tap the OK button on the printer’s screen.
  • Wait for a few minutes for the Brother MFC J775DWL printer to connect to your router.
  • Once the Brother MFC J775DWL printer is connected to your router successfully, the Connected message will appear on the printer screen.
  • To finish the entire connection setup, install the Brother MFC J775DWL print driver on your Windows or Mac system and configure the printer for the wireless connection. You can also get help from our technical experts in performing the setup.

Brother MFC J775DWL Scan

The Brother MFC J775DWL printer can perform scan operation from its control panel. If you have installed the Brother MFC J775DWL printer driver on your Windows or Mac system, you can scan from your device itself.

  • Switch on your Brother MFC J775DWL printer.
  • Lift the scanner lid. Make sure that the printer's scanner glass is clean.
  • If you find any small particles on the scanner glass, clear them and then place the document you wish to scan.
  • After positioning the document correctly, lower the scanner lid, and press the Scan button on the printer’s control panel.
  • Choose the Scan option using the arrow keys. Press the OK button.
  • If you wish to send the scanned document to your computer, first, connect your PC and the printer to the same network.
  • Choose your computer when prompted.
  • Now, if you are okay with the default scan settings, press the Black Start/ Color Start button.
  • If you are not okay with the default scan settings and wish to make some changes, select the Scan Settings option using the arrow keys.
  • Set the preferences as per your need.
  • Press the OK button followed by Black Start/ Color Start.
  • Now, your Brother MFC J775DWL printer will start to scan the loaded document and then send the scanned copy to the selected computer.

Brother MFC J775DWL Print

Using the Brother MFC J775DWL printer, you can perform the print operation from your computer. Before you begin the print operation, check if you have installed the Brother MFC J775DWL printer driver on your Windows or Mac system.The following steps given below explain how to perform the print operation from your Mac device.

  • Switch on your Brother MFC J775DWL printer.
  • Check if the tray contains enough paper to perform the print operation.
  • If the tray is empty or low, fill it with enough paper.
  • Now on your Mac system, select and open the document you wish to print.
  • Locate the File menu on the application screen and select it./li>
  • Click the Print option and select the Brother MFC J775DWL printer from the list.
  • Set the print preferences as per your desire and click the Print button.
  • The printer will receive the print job and print it.

Brother MFC J775DWL Copy

To know how to perform a copy operation on your Brother MFC J775DWL printer, read and proceed with the quick, simple steps given below.

  • Check if the Brother MFC J775DWL printer is turned ON.
  • Place the document to be copied in the ADF or on the scanner glass.
  • Locate and press the Copy button on your Brother MFC J775DWL printer’s control panel.
  • Set the number of copies, copy settings, and other preferences as per your need.
  • After setting the copy preferences, press the Black Start or Color Start button.
  • Now your Brother MFC J775DWL printer will start to copy the document that you have placed in the ADF/ on the scanner glass.

Brother MFC J775DWL Troubleshooting

The printer may stop responding or malfunction when you attempt to perform an operation on it. This may be due to several reasons. Sometimes, the printer displays an error code indicating a particular issue. You can find out the issue easily using the error code. In some cases, the printer may stop functioning abruptly without any indication. Finding the issue may become difficult in such scenarios. Our technical experts can help you out, whatever the printer issue is.