Brother MFC 9340CDW Toner Reset
Follow these quick steps to reset the toner cartridge on the Brother MFC 9430 printer.
- Power on the Brother MFC 9340CDW printer and wait until it initializes.
- Raise the Brother printer’s top cover to access the toner cartridge.
- Now, go to the Brother printer’s control panel and touch the Asterisk button. (*) Keep pressing it for about five seconds until a new menu is displayed on the LCD.
- Choose the cartridge that needs to be reset. On this screen, K, C, M, and Y represent black, cyan, magenta and yellow, respectively.
- The STD, HC, and SHC stand for Standard Capacity Cartridge, High Capacity Cartridge, and Super High Capacity Cartridge, respectively.
- Then the ‘Reset?’ prompt appears on the LCD. Choose the Yes option. Lower the Brother printer’s lid.
Replace Toner Brother MFC 9340CDW
Here are the guidelines to replace the toner cartridge on the Brother MFC 9340CDW printer.
- Power on the Brother MFC 9340CDW printer and wait until it initializes.
- Use the groove given at the front side of the Brother MFC 9340CDW printer to raise the top cover.
- The black, yellow, cyan, and magenta toner cartridges can now be accessed.
- Take the old or empty toner cartridge out of the Brother MFC 9340CDW printer.
- Remove the new Brother toner cartridge from the packaging and set it aside.
- Detach the orange plastic component from the new Brother print cartridge.
- Install the new Brother printer toner cartridge in the Toner cartridge drum unit assembly and then place the assembly in the printer carefully. Close the top cover.
- Wait for the LCD to display the standby screen before proceeding with a print operation.
Brother MFC 9340CDW Toner Refill
Here are the guidelines to refill the toner cartridge on the Brother MFC 9340CDW printer. The Toner Holemaking tool can be used for this refill procedure.
- Take the toner hole-making tool out of the packaging and set it aside. Peel off the Brother printer cartridge label.
- Pierce a hole in the toner cartridge with the tool and then empty the remaining toner from the cartridge.
- Take the new toner bottle, open it, and place the spout on the hole which you made to transfer the toner at a 70-degree angle.
- Use the aluminum foil provided in the toner refill kit to seal the hole. Reset the toner on the Brother MFC 9340 CDW.
