Brother HL l6200dwt Setup

Brother HL l6200dwt Setup

Brother HL l6200dwt Setup

Carry out the hardware setup of the Brother HL L6200DWT printer by performing the step-by-step instructions provided below.

  • Open the Brother HL L6200DWT printer’s box using a knife or scissors. Take out the necessary accessories like Quick setup Guide, installation disc, and power cord. Place these materials on the table.
  • Remove the styrofoam from the Brother HL L6200DWT printer box. Using both your hands, hold the protective cover and lift the printer out from the box.
  • After removing the plastic bag, keep the Brother HL L6200DWT printer on the installation site. Peel of the orange and blue tapes from the machine. Open the front cover of the Brother HL L6200DWT printer by pressing the Open button on the top panel.
  • Clear all the packing materials in the toner cartridge area. Take out the drum unit and toner cartridge assembly from the machine, place it on a flat surface.
  • Peel off the orange packing material surrounding the drum unit and toner cartridge assembly.
  • Insert the assembly back into the machine. Close the printer’s front cover properly.
  • After pulling out the paper tray from the machine, place a stack of paper in it.
  • Make sure not to load paper beyond the maximum paper mark to prevent paper jam and paper feeding problems in the future.
brother-hl-l6200dwt-setup
  • To fit the paper in the paper tray, move the paper guides accordingly.
  • Untwist the power cable and then use it to establish a connection between the Brother HL L6200DWT printer and the power source.
  • Press and then hold the Power button on the top panel of the machine to turn on the printer.

OPTIONAL STEP - LANGUAGE SETUP

  • Select General Setup OK Local Language.
  • Once you have set your desired language in the appropriate field, press the OK button on the Brother HL L6200DWT printer’s top panel.
  • Finally, press the Cancel button.

Brother HL l6200dwt Driver Download

To download the Brother HL L6200DWT printer driver, click the Driver Download button from our site. Alternatively, visit the manufacturer site to download the driver.

  • To access all the features and functions of the Brother HL L6200DWT printer, download the Full Driver & Software Package file.
  • File size of Full Driver & Software Package is 200.97MB. Check the version of the driver before downloading it.
  • Note: You need to have the recent version driver to perform printer functions from your computer.
  • The Brother HL L6200DWT printer driver is available for both the Windows and Mac Operating Systems.
  • Do remember to download the correct printer driver.
  • While purchasing the Brother HL L6200DWT printer, the installation disc is provided with it. Make use of this installation disc to install the driver on the computer.
brother-hl-l6200dwt-driver-download

Brother HL L6200DWT Manual

Before proceeding with the initial setup, go through the manual for a better understanding of the printer’s hardware parts. To download a soft copy of the Brother HL L6200DWT printer manual, follow the ways mentioned below.

Way 1 - downloading soft copy of the manual from our site

  • Click the Manual Download button on this page.
  • Provide the required details.

Way 2 - downloading soft copy of the manual from the manufacturer site

  • Visit the official website of the Brother product.
  • Mention the model name correctly in the appropriate field.
  • Navigate to the Manual section and select the English option from the Language drop-down menu.
  • Reference Guide and Online User’s Guide are also available in the User’s Guide section.
  • Move to the Setup Guide section to download the Product Safety Guide, Quick Setup Guide, and Drum Unit Replacement Guide manuals.
  • If you want to download Mobile Print/Scan Guide, AirPrint Guide, and Google Cloud Print Guide, navigate to the Additional Feature Guide section.
  • The Brother HL L6200DWT printer manual is available in the PDF format. Print the manual if you want to get a hard copy of the printer manual.

Brother HL L6200DWT Toner

TN850 is the toner cartridge compatible with the Brother HL L6200DWT printer. It is a black toner cartridge that yields up to 40000 pages. The shelf life of the TN850 toner cartridge is between 24 and 36 months. To yield a high print quality, you are recommended to use only genuine cartridge.

Brother HL L6200DWT Wired Setup

To know how to set up the Brother HL L6200DWT printer on a wired network, refer to the content below.

  • The components essential to perform a wired setup are installation disc and Ethernet cable
  • The first step in wired setup is to plug one end of the Ethernet cable to the Ethernet port of the Brother HL L6200DWT printer and the other end to your Windows computer.
  • Note: The Ethernet port is located at the rear side of the printer.
  • Check if you have turned on the Brother HL L6200DWT printer.
  • Download Full Driver & Software Package from the manufacturer site or install the driver using the installation disc.
  • Search for the downloaded installer file of the Brother HL L6200DWT printer and then double-click it to begin the installation process.
  • When you see the Select Language window, select the English (United States) option from the Select Your Language drop-down menu.
  • Click Next to view the License Agreement window. Read and review the terms and conditions of the Brother software if needed.
  • Select the checkbox beside the I accept these license agreements option.
  • Note: You have to accept the Brother software’s license agreement to continue with the driver installation process.
  • Move the cursor to the Click button and then click it in the License Agreement window. As soon as you see the Connection Type window, click the radio button next to the Wired Network ( Connection Method) option and click Next.
  • If you have already established the Ethernet connection, click the Next button on the next window opens. If not, establish an Ethernet connection between the Brother HL L6200DWT printer and the Windows computer. Click Next.
  • Now, the Select Machine window opens. Click the radio button next to the Brother HL L6200DWT printer in the Model list and click Next.
  • Note: If you are cannot see the model name of your printer in the Select Machine window, click the Enter IP Address button. In the Enter IP Address box, type the IP address of the Brother HL L6200DWT printer and then click the Search button.
  • In the next window, go to the Select An Installation Type section, and click the radio button beside the Standard button. Click the Next window to install the software.
  • Optional step: If you want to install the PassPort software, click the Install button below it in the Additional Software window.
  • Choose the additional options settings as per your requirement in the Additional Options window. When you receive the ‘Software installation complete. Your machine is ready to use’ message on the screen, click Finish.

Brother HL L6200DWT USB

To set up the Brother HL L6200DWT printer with a USB cable, proceed with the step-by-step instructions given below.

  • Once you have downloaded the driver, find the Brother HL L6200DWT printer’s installer file in the Downloads folder and double-click it.
  • Set your language in the Select Language window.
  • When you see the License Agreement window, select the checkbox beside the I accept the license agreement option to agree with the Brother software’s terms condition.
  • In the Connection Type window, click the radio button next to the Local Connection (USB) option and click Next to view the Select Machine window.
  • As soon as you see the ‘Please connect the machine to your PC, then click Next’ message on the screen, plug one end of the USB cable to the Brother HL L6200DWT printer and the other end to your Windows computer.
  • Note: The length of the USB cable should not exceed six feet.
  • Ensure that the Brother HL L6200DWT printer is turned on.
  • Select either the Standard or Custom option. However, you are recommended to select the Standard option.
  • Now, the software installation begins.
  • When you see the Additional Options window, select the options as per your need.
  • As soon as you see the ‘Software installation complete’ message on the screen, click the Finish button to close the Installation Complete window. The USB setup is now complete.
brother-hl-l6200dwt-usb

Brother HL L6200DWT Troubleshooting

Find the Brother HL L6200DWT printer’s problems and its troubleshooting steps to resolve them here.

1)PROBLEM - PAPER JAM

SOLUTION - remove the paper in the paper tray

2)PROBLEM - PAPER FEED

SOLUTION - check the paper quality and type before loading to prevent the paper feed problem. Make sure to load paper without curl or wrinkles.

3)PROBLEM - REPLACE TONER

SOLUTION - this error occurs when the toner cartridge is nearing its shelf life period.

4)PROBLEM - OUTPUT TRAY FULL

SOLUTION - clear all the paper in the output tray

brother-hl-l6200dwt-troubleshooting