Brother HL 3170CDW Toner

The Brother HL 3170 printer uses four toner cartridges to print and copy your documents. A black Brother HL 3170CDW toner cartridge, cyan, magenta, and yellow cartridge.

Brother HL 3170CDW Replace Toner

  • First, check if the Brother HL 3170CDw printer is turned on.
  • Raise the top cover of the Brother printer and make sure it is placed in the lock position.
  • Next, remove the Brother HL 3170cdw toner cartridge and drum unit assembly from the printer.
  • Uninstall the toner cartridge by pushing the green lock lever downwards.
  • Unwrap the toner cartridge and hold it by both the ends.
  • Shake it from back and forth several times to spread the toner powder evenly.
  • Peel off the protective cover from the toner cartridge.
  • Fix the new toner cartridge to the drum unit and wait until the green lock lever lifts automatically.
  • It is an indication that you have placed the cartridge properly.
  • Slide the green tab from one side to the other many times to clean the corona wire of the Brother HL 3170cdw Printer Setup.
  • Position the drum unit and the Brother HL 3170CDW toner cartridge in the correct slot and close the top cover of the Brother printer.

Brother HL 3170CDW Toner Reset

  • Pull the top cover of the Brother HL 3170 printer in the upward direction.
  • Press the Secure button and the Cancel button together.
  • With the help of the navigation arrows, choose the cartridge that you wish to reset. Tap OK.
  • Next, press the Up Arrow button to start the reset process.
  • The Accepted message will be displayed on the screen once you select the reset process option.

How to Reset Brother HL 3170CDW?

  • Make use of the following guidelines to reset the Brother HL 3170 CDW printer.
  • Press the Up arrow key and Down arrow key simultaneously and then select the Reset Menu.
  • Choose the network option using the navigation arrows.
  • Tap the Up Arrow button to select the Yes option. The reset procedure will begin now.

How to Check Ink Levels on Brother HL 3170CDW?

You can check the status from the control panel, Windows system, and Mac.

  • FROM THE CONTROL PANEL:
  • Select the Ink or Ink Management option from the control panel.
  • Choose the Ink Volume using the Up and Down arrow buttons.
  • Tap the Stop/Exit button.
Brother HL 3170CDW Toner
  • FROM WINDOWS:
  • Find the Status Monitor Utility icon from the taskbar and double-click on it.
  • The toner levels of each cartridge will be displayed on the home screen.
  • FROM MAC:
  • Launch the Status Monitor on your Mac system.
  • Go to the specified location: Macintosh HD/Library/Printers/Brother/Utilities. Open the monitor.
  • The toner levels of all the four Brother HL 3170CDW toner cartridges will be displayed.

Disclaimer

brotherprinters.co We focus on offering technical assistance to printer users and are not in any associated with the manufacturer. All the information provided on our site are solely intended for service purpose and not to promote any particular brand or company. The logos, images, and trademarks on the site are for reference purpose. Any action that you take by referring to the guidelines on this site is at your own risk. Our services are payment-based and are rendered only upon the request placed by the users. 

Brother Support

Copyright © 2019 - 2020 brotherprinters.co | All rights are reserved


Top