Brother HL 2270DW Troubleshooting

The Brother HL 2270DW printer will face issues at times. You can resolve errors using the guidelines given below.

Brother hl 2270dw Printer is Not Responding

  • First, check if there are any connection errors between your computer and Brother HL 2270DW printer.
  • If you have connected via a USB cable, then verify whether you have attached it firmly.
  • In case you have connected wirelessly, check if your router is working properly.
  • Next, check the driver settings. Make sure that your printer is added to the list. Also, verify whether it is selected during the printing process.
  • Set the Brother HL 2270DW printer as the default printer. If its status is Offline, then change it online.
  • Uninstall the Brother printer driver and install it after a few seconds.

Brother hl 2270dw Offline

  • Verify whether the Brother printer is turned on and connected to a proper power supply.
  • Look at the control panel to know whether there are any error codes displayed.
  • Check if your computer and Brother printer are connected firmly. Reconnect them if needed.
  • Also, verify if your Brother printer is set as default.
  • From the Control Panel of the Brother printer, select the Hardware & Sound option followed by Devices and Printers.
  • Go to the Printer tab and select the Cancel All Documents option. Tap Open As Administrator.
  • Next, find your printer from the list and right-click on it. Select the See What’s Printing option. Clear the check mark near the Use Printer Offline option.

Brother hl 2270dw Printer Not Connected

  • Check if the Brother HL 2270DW printer is turned on and ready to connect.
  • If you have connected via USB, then check if the cable is attached firmly to the computer and the Brother printer.
  • Verify if there are any updates for your Brother printer. If so, install them without any further delay.
  • Go to System Preferences and select the Print & scan option. From the list of printers, you have to remove the printer that is not able to connect and add it again to the list.
  • Uninstall the Brother printer drivers for your system. Install it after a few minutes to resolve the issue.
  • Reset the printing system by navigating to the System Preferences option from the Apple Menu.
  • Select the Printers & Scanner option. Click anywhere in the Devices screen while pressing the Control button.
  • lick the Reset Printing System option.
brother-hl-2270dw-printer-not-connected

How to Solve brother hl 2270dw Paper jam

  • Make use of the below-given instructions to clear the paper jam.
  • As soon as you notice a paper jam, you have to cancel the print jobs.
  • Raise the front cover of the Brother HL 2270DW printer and wait for 10 minutes so that the printer cools down.
  • The proceeding step is to uninstall the drum unit and the toner cartridge assembly.
  • Pull out the jammed paper and insert them back in their slots.
  • Now, open the back cover of the Brother printer and open the fuser cover by pulling the tabs present on the left and right sides.
  • If there is any paper stuck there, you have to pull it out slowly.
  • Next, you have to remove the duplex tray out of the Brother printer.
  • Clear the paper jam in that area and check if there any small pieces of paper stuck there.
  • it the duplex tray in its slot. Close the front cover and check if the Brother HL 2270DW printer is working properly.

How to Solve brother hl 2270dw Printing blank Page

  • First, check the ink levels of the toner cartridge. If they are low, you have to replace the toner cartridge.
  • Check the communication between the Brother printer and computer. Reconnect the printer to the device if necessary.
  • Navigate to Windows Service Manager. You have to restart the Printer Pool Services and then try printing files.
  • Power cycle your Brother HL 2270DW printer to resolve this error.
  • Verify if you have to change the printhead or not. If there are any issues with the printhead, then the printing blank page error will occur.
  • Also, check if the printer nozzle is normal.
  • If the issue persists, you have to reset your Brother printer.

How to Solve brother hl 2270dw paper feed Problem

  • To resolve this error, clean the pick up rollers of your Brother printer using a damp cloth.
  • Turn off your Brother HL 2270DW printer and remove any cables connected to it.
  • The next step is to pull the paper tray out of the machine.
  • Discard the papers that are present in the paper tray. Make use of a lint-free cloth dipped in warm water and clean the separator pad.
  • Next, you have to wipe any dust from the pick up rollers. Power up the Brother printer and check if the issue is rectified.
  • If the error is not resolved, then you might have to change the pick up rollers.

Brother Printer hl 2270dw drum error

  • If the Drum Error message appears, then you have to reset the drum.
  • Open the front cover of the Brother printer by lifting it.
  • Press the Go button until all the LED lamps are lit. Release the Go button and proceed to the next step.
  • Now, close the front cover. The reset process will take a few minutes to complete.
  • If the issue is not rectified, then you have to clean the corona wire. It is available inside the drum unit.
  • Take off the drum unit and toner assemble after opening the front cover. Hold the green tab and pull it from one end to the other.
  • Release the green tab after positioning it in its slot.
  • Clean the contacts present at the sides of the toner to rectify this issue.
  • Replace the drum unit if the error is not sorted out. Talk to the technical experts to permanently resolve this issue.